| Single Point Dresser |
 |
Only one piece diamond in the stem. So one diamond point works at a time only Diamonds for single point dressers are selected in accordance with quality and size requirements. The question of using a superior, average or commercial quality, depends on the grinding finish require, and the machines and working parameters.
The dressing tool takes care of two main functions:
¨’ It removes abrasive grains, which have become blunt and metal particles with high efficient
¨’ It recreates the correct geometric shape of the grinding wheel. |
| Chisel Type/ Profile Diamond Dresser |
|
|
Chisel diamond dressers are used for forming accurate profiles on grinding wheels.
Various shanks, radii, flats and angles are available on these chisels as following,
Angle from 30¡ã- 60¡ã & Radius from 0.002¡±-0.02¡±
Profile diamonds can be used for all grinding wheels (e.g. corundum, special fused alumina, silicide carbide grain with ceramic and resinoid bond. |
| Impregnated Diamond Dresser |
|
|
They have been developed from multi point dressers. In contrast to the latter they are manufactured with crushed diamond grit rather than small natural diamonds. The advantages of the diamond impregnated dresser lie in its exceptional sharpness, which results from sharp edges and points of the broken diamond grit. Impregnated dressers are generally used to straight dress larger wide grinding wheels. |
| Multi Point Dresser |
|
|
More economical than single point dressing tools because small diamonds are mainly used. Thanks to the larger diamond surface the work load is optimally distributed. The multi point dresser wears down much slower when comparing with single point diamond tools. It need not to be re-set or re-cut during its entire service life.
Multi-stone dressing tools are usually used for large grinding wheels. |
| Blade Type Diamond Dresser |
|
|
It consists of long needle shaped natural diamonds placed in a metal matrix in such a way to allow consistent performance. There is no rotating required, no adjustment and can be replaced when completely consumed.
This tool is generally used for forming of grinding wheels and are best suited for dressing of alumina oxide and silicon carbide grinding wheels. Also apply for grinding auto parts like Crankshaft, Camshaft, Connecting rod, Axles, Gears etc. |
| Diamond Indenter |
|
|
Rockwell indenter, Vikers and Knoop indenter, Micro-indenter, Standard indenter are all made of high quality natural diamond, they are the key fittings of all kinds of sclerometers.
They are used in manual & Automatic hardness testing equipments. They can give the accurate hardness of metals that measured by them. |
| Diamond Roller Dresser |
|
|
Rows of diamonds are baked into the circumference at regular intervals. Natural diamond tips which have been specially selected and treated largely exclude the chance of the individual stones breaking.We operate a full in-house design and draughting service, so we can incorporate special features as required. We are pleased to accept customer's component drawings as the basis for suitable Rotary Diamond Dresser installations, which may be draughted onto Consort's paper or the Client |
